Open-ear wireless earbuds are carving a niche between traditional in-ear TWS models and bone conduction designs. SOUNDPEATS’ latest offering, the Clip1, takes a clip-style, open-ear approach that focuses on comfort, sound quality, and daily usability. Unlike regular earbuds that sit inside the ear canal, open-ear designs rest outside, letting users stay aware of their surroundings. This is especially useful for runners, cyclists, or anyone navigating busy streets. While noise cancellation is common in earbuds, the ability to hear traffic or other hazards is an important safety advantage.
The SOUNDPEATS Clip1 delivers more than its open-ear design. Each earbud weighs about 5 grams and features the N-Flex Arch™ Memory Wire, providing a secure fit without pinching—even for glasses or helmet wearers. On the audio side, the earbuds support Hi-Res Audio with LDAC on Android, while the DynamicEQ™ Pro Algorithm balances bass and highs for a fuller sound. A 12mm dynamic driver and Dolby Audio support via the PeatsAudio app further improve music and video playback.
Related Story: SOUNDPEATS Air5 Pro Review – Comfort, Sound Quality, Noise Cancellation, and Gaming Performance
Practical features make the SOUNDPEATS Clip1 convenient for daily use. AutoSense™ ensures proper left and right channels, dual-device connection allows simultaneous phone and laptop use, and a quick ten-minute charge provides roughly two hours of playback. Expanded touch controls, wear detection, AeroVoice™ wind noise reduction, and the open-ear layout enhance versatility for commuting, remote work, or workouts.
After several weeks of testing, the SOUNDPEATS Clip1 proves to be a well-rounded open-ear option. It offers better sound quality and comfort than many bone conduction alternatives, while remaining accessible and packed with features for everyday use.
SOUNDPEATS Clip1 – Specifications
| Specification | Details |
|---|---|
| Driver | 12 mm Dual-Magnet Dynamic Driver (Titanium PVD-Coated) |
| Frequency Response | 20 Hz – 40 kHz |
| Bluetooth Version | 5.4 |
| Audio Codecs | SBC / AAC / LDAC |
| Hi-Res Certified | Yes |
| Dolby Audio | Supported |
| DynamicEQ Pro | Supported |
| Battery Life | 8 h (earbuds) + 40 h (with case) |
| Fast Charging | 10 min = 2 h playback |
| Charging Port | USB-C |
| Weight | 5 g per earbud |
| Water Resistance | IPX5 |
| Microphone | 1 per earbud (AI ENC + AeroVoice™) |
| AutoSense™ Detection | Yes |
| Multipoint Connectivity | Yes |
| App Support | PeatsAudio (Android / iOS) |
| Game Mode | Yes |
| Price | $69.99 USD |
| Launch Date | November 12, 2025 |
Unboxing
The SOUNDPEATS Clip1 comes in a clean, premium-looking box that highlights the earbuds’ elegant black and gold design. The front features key highlights like Hi-Res Audio Wireless, LDAC, and Dolby Audio support, along with VGP 2025 Summer Gold Award badges that emphasize its audio quality. On the back, detailed specifications are listed, including Bluetooth 5.4, a 20Hz–40kHz frequency range, 8 hours of playtime per charge (up to 40 hours with the case), and battery capacities of 45mAh for each earbud and 450mAh for the charging case. It also includes a product image showing the earbuds in their charging case.
The SOUNDPEATS Clip1 unboxing is simple and organized. Inside, the earbuds are placed in their charging case, with a Type-C cable, a User Manual, an App Guide, and a few stickers included. Everything is neatly arranged, making it easy to start using the earbuds right away.
Design
The SOUNDPEATS Clip1 brings a fresh take to compact audio gear with its clip-on approach, offering a clean and refined look that feels natural in everyday use. Its curved matte-black body is paired with subtle rose-gold accents that enhance the design without feeling excessive. The compact housing keeps the earbuds visually balanced and easy to pair with casual or athletic outfits. Even with only a black option available during testing, the overall styling feels modern and adaptable for a wide range of users.
Comfort plays a major role in the Clip1’s appeal. Each earphone weighs about 5g, making them light enough for extended listening without strain, while the total 56g weight with the charging case keeps them portable. The 0.6mm aerospace memory wire loops outward in a stable arc, helping the earbuds stay firmly in place during daily movement or exercise. The rounded shells and small ventilation openings support a secure, breathable fit that remains comfortable whether you’re commuting, walking, or working out.
The SoundPEATS earbuds carry a clean design with a simple logo on each side. Each earbud uses a rounded chamber for the speaker, supported by seven small openings that guide the audio toward the ear. This keeps the structure practical while maintaining a balanced feel. The back section holds the battery and also works as the touch area, keeping everything organized. A small microphone hole sits at the top to improve voice pickup during calls. The charging contacts are placed at the bottom, completing a layout built for easy daily use.
Touch controls handle all the basic actions, making it easy to manage playback, calls, and sound modes without touching your device. Single-tap gestures are fully customizable through the companion app. You can switch tracks, activate game mode, toggle Dolby spatial sound, or turn on wear detection. Tapping functions only work while the earbuds are being worn, preventing accidental commands. The touch system feels responsive and gives enough flexibility for everyday use or gaming sessions.
The charging case has a shiny gunmetal finish and a 35 mm thickness, giving it a slightly heavier feel while still being easy to carry. On the back, you’ll find a pairing button and a USB-C port for charging, as wireless charging isn’t available. The lid closes tightly, and the LED on the front shows when the earbuds are charging inside, keeping everything simple and tidy.
The earbuds lock onto the ear securely and stay in place during daily movement. Inside the case, the cockpit layout includes a metal charging pin in the center. Each earbud comes with a small protective sticker that must be removed to reveal the charging contacts. Once placed back into the case, the earbuds activate and become ready for Bluetooth pairing with your phone or other devices.
Battery life reaches around eight hours per charge, while the case adds another forty hours. Charging is handled through USB-C, and a quick ten-minute top-up provides about two hours of playback. The LED indicator turns blue while charging and switches to white once fully ready. The case feels well-built, and the earbuds sit firmly inside without any rattling.
One useful feature is that you don’t need to remember which earbud belongs to which ear. Placing them in the case immediately shows the correct orientation. You can also use one earbud at a time to stay aware of your surroundings or extend total listening time. When one runs out of power, switching to the other keeps you going, allowing up to sixteen hours of single-ear use or close to forty hours when rotating both.
Features and Performance
Using the Clip1 in real-world conditions highlights how much attention SOUNDPEATS put into daily convenience. Multi-device connection works smoothly during quick swaps between phone, laptop, and tablet. There’s no need to repair or dig through settings; the earbuds simply pick the last active device and continue playing. Wear detection is equally reliable. Removing the earbuds pauses playback instantly, and the moment they’re clipped back on, audio resumes. Auto left-right adaptation also makes a difference during busy routines—whether you grab the left or right bud first, the channel adjusts on the spot, keeping everything in sync.
Audio quality holds up well during both casual listening and focused testing. With Hi-Res certification and LDAC support, the Clip1 delivers more detail than typical open-ear earbuds. High frequencies stay clean, vocals remain clear, and the bass carries enough weight to feel engaging without overpowering the rest of the track. Compared with standard AAC playback, LDAC offers noticeably richer depth and separation, especially in acoustic and instrumental tracks.
Dolby Audio adds an extra layer of immersion when watching movies or playing games. It gives the soundstage more dimension, helping effects and voices feel better spaced. The DynamicEQ™ Pro algorithm also works quietly in the background, adjusting frequencies as you move between environments. Paired with the 12mm dual-magnet drivers, the tuning keeps the sound controlled—tight bass, defined mids, and crisp highs—even when switching from indoors to outdoor activity.
Apple users will appreciate that SOUNDPEATS Clip1 supports Apple’s audio codecs without limitations. During testing on an iPhone and MacBook, audio quality remained consistent, and connection stability was solid.
Comfort is another highlight. The 0.6mm N-Flex Arch™ memory wire adapts quickly to the shape of your ear, giving a secure fit without pressure points. Once adjusted, it stays in place even during workouts. The lightweight build makes long listening sessions easy, whether you’re at your desk or outside for a run.
AutoSense technology enhances the hands-on feel. As soon as you place the earbuds on your ears, the system identifies which side is left or right and updates the channels instantly. There’s no manual setup, and no delay that might interrupt your flow.
The open-ear clip-on design keeps you aware of your surroundings, which is useful during commutes, office work, or household tasks. Because the earbuds don’t seal the ear canal, they also reduce heat buildup and offer better ventilation. This makes them a good match for users who experience discomfort with traditional in-ear designs.
Bluetooth Pairing & Factory Reset
Pairing the SOUNDPEATS Clip1 is simple and quick. Opening the charging case powers the earbuds on automatically, while closing the lid turns them off. For first-time use, remove the protective stickers from each earbud. Once powered, the earbuds show up as “SOUNDPEATS Clip1” in your phone’s Bluetooth list and connect within seconds.
If needed, you can manually enter pairing mode by holding the button on the charging case for two seconds until the white light flashes. This is useful when switching devices or troubleshooting connections.
First-Time Pairing Steps
- Remove the earbuds, peel off the protective film, and place them back in the case to activate.
- Open the charging case again. The earbuds will power on and enter pairing mode.
- Refresh your phone’s Bluetooth list and select “SOUNDPEATS Clip1” to pair.
Forced Pairing
Place earbuds in the case, open the lid, and hold the button for two seconds. The white light flashing continuously means pairing mode is active.
Multi-Device Connection
The Clip1 can connect to two devices simultaneously.
- Connect to Device A, then turn off its Bluetooth. The earbuds re-enter pairing mode.
- Connect to Device B by selecting “SOUNDPEATS Clip1.”
- Turn Bluetooth back on for Device A and reconnect. Both devices now stay connected automatically.
Notes: Dual-device connection doesn’t work with LDAC. To use LDAC, disable dual-device mode in the SOUNDPEATS app.
Factory Reset
- Place earbuds in the charging case and keep the lid open.
- Hold the function button for 10 seconds until the red light flashes rapidly three times.
- The earbuds reset and enter pairing mode automatically, with the white light flashing continuously.
This setup ensures smooth connections and an easy reset process if issues arise.
| Action | Steps | Indicator |
|---|---|---|
| First-Time Pairing | Remove protective film → place earbuds in case → open case → select SOUNDPEATS Clip1 on phone | White light flashes during pairing |
| Manual / Forced Pairing | Open case → hold case button 2 sec | White light flashes continuously |
| Multi-Device Connection | Connect Device A → turn off Bluetooth → connect Device B → reconnect Device A | Dual-device active; not compatible with LDAC |
| Factory Reset | Place earbuds in case, lid open → hold button 10 sec | Red light flashes 3× → white light flashes continuously after reset |
Battery and Charging
The SOUNDPEATS Clip1 delivers around 8 hours of continuous playback on a single charge. The compact charging case adds up to 40 hours of total battery life, making it easy to keep them powered throughout the day. Fast charging is convenient for quick top-ups. A 10-minute charge provides roughly 2 hours of playback, which is useful before a commute or short trip. Each earbud has a 45mAh battery, while the charging case holds 450mAh. Our testing matched these figures, with fast charging providing reliable playback in a short time.
The case features a clear indicator system. With the lid closed, the light shows the case’s battery level. Opening the lid switches the display to the earbuds’ charge. If one earbud is removed, the indicator updates to show the other’s status. The color code is easy to follow: green for 70–100%, yellow for 20–69%, and red below 20%.
Recharging the case is simple with the included cable. Indicator lights change as the battery fills. A steady green means full charge, while pulsing green, yellow, or red shows lower levels. Filling the case from empty takes about two hours, which is reasonable given the extended playback it provides.
Overall, battery performance is reliable, and the charging process is simple to follow. Quick top-ups and the intuitive indicator system make the earbuds practical for daily use.
PeatsAudio APP
The PeatsAudio app works as a companion for SOUNDPEATS earbuds. On launch, it gives a clear view of connected devices, showing battery levels and connection status at a glance. Selecting a device, like the Clip1, brings up essential controls such as Dolby Audio for spatial sound, Multi Device Connection for easy switching, and In-Ear Detection to manage playback automatically. The interface keeps everything accessible on one screen, making adjustments quick and convenient.
Audio customization is where the app really shines. The Equalizer section offers preset profiles like SOUNDPEATS Classic, Rock, and Electronic. For those who want a tailored experience, the Adaptive EQ lets users fine-tune sound based on personal preferences. This makes it easy to get a listening experience that matches your taste, whether casual or detailed.
Touch controls are fully adjustable through the Shortcuts menu. Users can remap single, double, or triple taps for functions like track navigation and volume control, integrating the earbuds smoothly into daily use. Firmware updates are handled directly in the app, ensuring the earbuds stay up to date with improvements and new features.
User Experience
The SOUNDPEATS Clip1 delivers a user experience that balances comfort, practicality, and audio quality. Unlike traditional in-ear earbuds, the open-ear, clip-on design allows you to stay aware of your surroundings, making them a good option for commuting, outdoor workouts, or everyday use. Each earbud weighs just 5 grams, and the N-Flex Arch™ memory wire adapts to your ear shape, holding the earbuds securely without adding pressure, even during extended listening sessions or active movement.
To get the best fit and performance:
- Insert the earbuds into your ears and slide them downward to a slightly lower central position. Adjust them slightly until you feel comfortable.
- Rotate the earbuds so that the sound outlet is aligned vertically with your ear canal for the best fit and audio performance.
- Improper wearing may negatively affect both call quality and listening experience.
Sound quality is one of the SOUNDPEATS Clip1’s strongest points for an open-ear design. With Hi-Res Audio certification, LDAC on Android, and Dolby Audio support, the earbuds deliver clear highs, well-defined mids, and engaging bass without overpowering the mix. The DynamicEQ™ Pro algorithm adjusts frequencies in real time based on your environment, and the 12mm dynamic drivers provide tight bass, clear vocals, and detailed instrument separation. Even in outdoor settings, the sound remains balanced, and AeroVoice™ wind noise reduction helps maintain call clarity. The open-ear layout does slightly reduce passive isolation, but it makes up for it with a spacious, natural audio presentation that feels airy and open.
For gaming, the Clip1 offers a solid experience for mobile and casual PC play. Latency is minimal, and activating Game Mode through the PeatsAudio app improves audio-to-visual synchronization, reducing noticeable lag in fast-paced titles. While the open-ear design cannot fully replicate the immersive enclosure of in-ear or over-ear gaming headsets, the earbuds provide a reasonably wide soundstage, making it easier to locate directional cues like footsteps or gunfire in competitive scenarios. The Dolby Audio support also adds depth to environmental sounds, which can enhance situational awareness without cutting you off from your surroundings. Overall, gaming feels responsive, and audio cues are clear enough for casual or on-the-go play.
Practical features make daily use straightforward. AutoSense™ instantly detects left and right earbuds, wear detection pauses playback when removed, and multi-device support allows seamless switching between phone and laptop. Expanded touch controls handle playback, volume, and sound mode adjustments, while single-ear use is available to extend total listening time and maintain environmental awareness.
Battery life is dependable. Each earbud delivers about eight hours per charge, with the case providing up to 40 additional hours. A quick ten-minute charge adds roughly two hours of playback, and LED indicators make it simple to monitor battery levels at a glance. The PeatsAudio app complements the hardware, offering equalizer presets, adaptive EQ, touch control customization, and firmware updates for ongoing improvements.
Overall, the Clip1 offers a comfortable, versatile, and practical user experience. Its secure fit, clear and balanced sound, responsive gaming performance, and long battery life make it a reliable option for music, calls, workouts, commuting, and casual gaming sessions.
Conclusion
The SOUNDPEATS Clip1 open-ear Earbuds are available now. For more information, visit the official SOUNDPEATS website. For detailed tech reviews, click here.
